SKU: 401-364
Sekonic L-478D LiteMaster PRO Light Meter
SKU: 401-474 | FREE U.S. shipping!
- Incident Metering for Ambient & Flash
- Reflected 5 degree spot metering with optional viewfinder attachment
- Cine Setting: Frame Rate & Shutter Angle
- 2.7" Color Touchscreen LCD
- Flash Analyzing Function
- Filtration Compensation Mode
- Illuminance/Luminance Measurements
- Contrast Function & Memory Mode
- Custom Exposure Profiles & Calibration
Overview
Equipped with a large and intuitive 2.7" color touchscreen LCD, the LiteMaster Pro L-478 Series Light Meter from Sekonic will make incident metering for ambient and flash light super simple. The major ability of this system enables complete control of the flash's power in 0.1-step increments.
Notable for the L-478 series light meter is the large color touchscreen, which allows for fast control over settings for both ambient and flash metering. The meter is quite capable as well, able to function within a range of -2 to 22.9 EV at ISO 100. Additionally, for the current crop of hybrid shooters this model expands on its standard stills functions with two distinct video modes: Cine and HD Cine. These settings give access to frame rate selection from 1-1,000 fps as well as shutter angle settings from 1-358° as well as ISO 850 for Canon cinema cameras.
Guaranteeing the best possible performance is a suite of functions and features that will ensure users have the best tools available to them. Among these is a flash analyzing function that uses ambient and flash simultaneously to allow for shooters to dial in their preferred mix. Also, using the included Data Transfer Software users will be able to do Exposure Profiling for their camera by using the optional 5° viewfinder, showing dynamic range limits and knowing that you will have an accurate exposure. Alongside this is a Filtration Compensation Mode that allows for the meter to account for filter factor, which can now be done at up to 12 EV for landscape shooters using high-density ND filters. Other features include a contrast function for comparing brightness, a memory mode for 8 readings, and illuminance or luminance measurement.
Notable for the L-478 series light meter is the large color touchscreen, which allows for fast control over settings for both ambient and flash metering. The meter is quite capable as well, able to function within a range of -2 to 22.9 EV at ISO 100. Additionally, for the current crop of hybrid shooters this model expands on its standard stills functions with two distinct video modes: Cine and HD Cine. These settings give access to frame rate selection from 1-1,000 fps as well as shutter angle settings from 1-358° as well as ISO 850 for Canon cinema cameras.
Guaranteeing the best possible performance is a suite of functions and features that will ensure users have the best tools available to them. Among these is a flash analyzing function that uses ambient and flash simultaneously to allow for shooters to dial in their preferred mix. Also, using the included Data Transfer Software users will be able to do Exposure Profiling for their camera by using the optional 5° viewfinder, showing dynamic range limits and knowing that you will have an accurate exposure. Alongside this is a Filtration Compensation Mode that allows for the meter to account for filter factor, which can now be done at up to 12 EV for landscape shooters using high-density ND filters. Other features include a contrast function for comparing brightness, a memory mode for 8 readings, and illuminance or luminance measurement.
Specifications
- Catalog Numbers:
- SKU:
- 401-474
- Family:
- L-478
- Sensor:
- SPD
- Measuring System:
- Exposure Meter
Incident light: Swivel head, retractable lumisphere
Reflected light: Removable, with Optional 5 deg. VF - Measuring Range and Modes:
- Measuring Modes (Ambient Light):
- T priority, F priority, TF priority, HD_CINE (T priority), CINE (f/s priority), Lux/FC, Cd/m2/FL
- Measuring Modes (Flash light):
- Cordless, Cord-in (PC), Multiple cumulative flash
- Measuring Range at ISO100 (Ambient Incident Light):
- EV-2 to EV22.9
0.63 lx to 2,000,000 lx
0.1 fc to 180,000 fc - Measuring Range ISO100 (Ambient Reflected Light):
- EV3 to EV22.9
1.0 cd/m2 to 980,000 cd/m2
0.29 fl to 290,000 fl - Measuring Range (Flash Incident Light):
- F1.0 to F161.2(=128.9)
- Measuring Range (Flash Reflected Light):
- F2.8 to F161.2(=128.9)
- ISO Range:
- ISO 3 to ISO 409,600 + ISO 850
- Aperture Range (Ambient Light):
- F0.5 to F161.2(=128.9) in 1, 1/2, 1/3 step
(Analog Scale: F1.0 to F90 in 1/3 step) - Aperture Range (Flash Light):
- F0.5 to F161.2(=128.9) in 1, 1/2, 1/3 step
(Analog Scale: F1.0 to F90 in 1/3 step) - Shutter Speeds Range (Ambient Light):
- 30m to 1/64,000s in 1, 1/2, 1/3 step
(Analog scale: 4s to 1/2,000s in 1/3 step) - Shutter Speeds Range (Flash Light):
- 30m to 1/1,000s in 1, 1/2, 1/3 step
- Frame Rate Range (Ambient Light):
- 1 f/s to 1,000 f/s plus other 20 settings (customized from 0.001 f/s to 9,999.999 f/s)
- Shutter Angles Range (Ambient Light):
- 1 deg. to 358 deg. plus other 20 settings (customized from 0.001 deg. to 360 deg.)
- EV Range (Ambient Light):
- EV-27.9 to EV55.8
- Memory:
- Yes (9 times)
- Average:
- Yes
- Contrast/Comparison Function:
- Yes (+/-9.9EV in 1/10 step)
- Flash vs Ambient Analyzing:
- Yes (in 10% step)
- Filter Compensation:
- Yes (-12EV to 12EV, preset 30 type)
- Exposure Compensation:
- Yes (-9.9EV to +9.9EV)
- Calibration Compensation:
- Yes (-1.0EV to +1.0EV)
- Custom Settings:
- Yes (13 custom settings)
- Physical:
- Operating Temperature:
- -10 deg. C to 50 deg. C
- Storage Temperature:
- -20 deg. C to 60 deg. C
- Power Source:
- 1.5V x 2 (AAA battery)
- LCD:
- 2.7" color dot matrix touch panel LCD
- LCD Backlight:
- Yes
- Product Weight (lb):
- 0.29
- Product Weight (kg):
- 0.13
- Product Height (in):
- 1.02
- Product Length (in):
- 5.51
- Product Width (in):
- 2.24
- Product Height (cm):
- 2.6
- Product Length (cm):
- 14
- Product Width (cm):
- 5.7
WHAT'S IN THE BOX
Software
Data Transfer Software for MAC
IMPORTANT!
- Please see this note for details of DTS operation with OS 11.1 Big Sur.
- Customers who already installed DTS version 6.0 or earlier, before installing new version below, completely remove any previous versions and see this instruction and note.
- Please see the Software Guide for installation.
- Turn off firewalls and anti-virus programs during the installation process.
- Compatible with L-858 series, L-478 series and L-758 series.
- If you fail installing the latest Data Transfer Software / Utility Software due to Gatekeeper by Apple inc. Please see this instruction.
- APFS Restrictions
Depending on the specification of the APFS file system, file display may not be in alphabetical order. Therefore, when saving multiple images in the same folder, it is difficult to find the necessary image for profile creation.
Please kindly create a subfolder and manage related images by combining relevant images for each profile. - Applicable Product
- Mac Computer Products installed SSD model (mac OS 10.13 High Sierra and later)
- A Device formatted as APFS (mac OS 10.12 Sierra and later)
Version 6.10 for OSX 10.13 High Sierra - OSX 10.15 Catalina compatible with L-858D, L-758 and L-478 series
Download DTS ver. 6.10 for OSX 10.13 - 10.15 (9.7 MB)
Software Guide (4.4 MB)
Requirements of Version 6.10
| Software | Data Transfer Software USB Driver |
| OS *1 | MAC OS X 10.13 MAC OS X 10.14 MAC OS X 10.15 |
| Models | Macintosh with a standard USB interface *2 *3 |
| CPU | Intel CPU (compatible with operating conditions of OS) *2 |
| RAM | Compatible with operating conditions of OS |
| Hard disk space | Same as above |
| Display | Screen resolution: At least 1024 x 768 Color quality: At least 16-bit |
*1 If you are using a Macintosh computer, be sure to use the Macintosh version of the software. Operation of the Windows version is not guaranteed when running in Virtual PC for the Mac.
*2 Intel CPU (except Core 2 Duo and earlier) dedicated. 68k computers and Power PCs not supported.
*3 Please note the following:
- The operating system must be the one pre-installed on the computer.
- Proper operation may not be possible on certain Macintosh models and configurations.
- Proper operation is not guaranteed on a Macintosh with an upgraded operating system
or an add-on USB interface.
- Proper operation is not guaranteed over connections through a USB hub.
Data Transfer Software for WINDOWS
IMPORTANT!
- Customers who already installed Data Transfer Software version 5.00, update the software by using "UPDATE" function in Data Transfer Software. However, when updating from version 5.01 with Windows 10, User Account Control may block the updating. In this case, please uninstall the old version 5.01, and install new version 6.10.
- Customers who already installed DTS version 3.093 or earlier, before installing new version below, completely remove any previous versions.
- Please see the Software Guide for installation.
- Turn off firewalls and anti-virus programs during the installation process.
- Version 5.10 is newly compatible with L-858 series in addition to L-758 and L-478 series. Version 5.01 or earlier is compatible with only L-758 and L-478 series.
Version 6.10 for Windows 8.1 and 10 compatible with L-858, L-758 and L-478
Software Guide (4.6 MB)
Requirements
| Software | USB Driver |
| OS |
Windows® 8.1 (32/64-bit version) *1 |
| Models | PC with a standard USB interface *3 |
| CPU | Compatible with operating conditions of OS |
| RAM | Same as above |
| Hard disk space | Same as above |
| Display | Screen resolution: At least 1024 x 768 |
| Color quality: | At least 16-bit |
- Windows 8.1 / Windows 8.1 Pro / Windows 8.1 Enterprise.
- Home / Pro / Enterprise.
- Please note the following:
- The operating system must be the one preinstalled on the computer.
- Proper operation may not be possible on certain computer models and configurations.
- Proper operation is not guaranteed on a computer with an upgraded operating system or an add-on USB interface, a homemade computer, a shop-made computer, or in an emulator environment (such as Virtual PC).
- Proper operation is not guaranteed over connections through a USB hub.
Firmware
Sekonic L-478D LiteMaster PRO Light Meter Firmware
IMPORTANT!:
1. To update the firmware of your meter, install the Data Transfer Software first.
2. Please see the Software Guide for installation under the software tab above.
3. Go to the "Update Setting" tab on the screen of Data Transfer Software, and follow the instructions.
NOTE: Depending on the firmware version, the features and functions may be different.
See the Release Note here for firmware version.
Manuals
Write a Review
